Cartridge Heaters can, to a limited space, give very high power. Thanks to the design the heat is quickly distributed over the whole surface mantle of the element. The element can withstand high demands of impact resistance and vibration security. Fields of application for cartridge heaters are primarily tool heating within e.g. plastic -, rubber -, wood -, and paper industry, foundries, medicin technical and laboratory heating of liquids.
Nozzle Elements are produced with high precision and with high surface loading to meet the high demands of quick and safe heating. During the manufacturing process the element is subject to very high pressure to reach high insulation resistance, good heat transmission without internal voids in the element and a very smooth surface for optional and uniform heat transmission from the total surface of the element. The element is absolutely tight to avoid that for instance melted plastic, oil or gas can leak in.
Ring and Band Elements are generally produced and supplied to according to customer specification. Examples application areas are: Injection moulding machines-extruders, containers, tanks, moulds, tools, etc. The design of these units is typically either Micanite or Ceramic with plate casing.
Types: We can supply both UTX and UTC design cartridge heaters in a huge variety of sizes and also to custom specifications.
Stainless steel AISI 321/EN 1.4541
Ø 6.5 , 8, 10, 12.5, 16, 20 mm
250 mm glass fibre armoured nickel wire
Reamed holes a smallest tolerance H7
Limited Unit 10, Top Deck
Bolton, BL4 0AN
Tel: 0161 727 3713
Email: [email protected]