The HRH Flameproof range of immersion heaters are designed for unsafe environmental conditions where ordinary immersion heaters cannot be used. Having manufactured our first range of hazardous area heaters back in 1953, our extensive knowledge of products and applications continues to be design into the HRH range. Fully ATEX certified to class IIB and with standard screw-in immersions up to fully engineered 180kW process heaters.
Cylinder brands such as Albion, Range, Copperform, Aquastel, Stelflow and many more can all be fitted with our products. The CESTB-340 range of Domestic Immersion Heaters were designed by us and are manufactured to the original specifications only by us.
Depending on application our standard domestic immersion heater product range are branded Heatrod, Thermtec and SHEL and are designed for use in both unvented/vented and copper/stainless steel hot water cylinders, having different controls and settings dependent on application. Ranging from simple high temperature safety cut out to very specific operating temperature spectrums for Thermal Store applications we’ve got it covered.
eCOHeat – for Solar & Marine applications – We manufacture low energy immersion heaters from our eCOHeat range. These are supplied in 1kw and 2kw formats and are aimed at renewable and marine applications which require low wattage heating. Installation into Solar, Ground Source and Air Source heating systems caters for the lower energy being generated on site. This is also an ideal fit for many Marine applications where lower power consumption is a requirement. See these products in our online shop through the menu link or via the “buy now” link below.
We also provide a bespoke service for many styles of Immersion Heater so in the unlikely situation where we cannot reference a product to our standard and stock ranges we will make a unit to your requirements! – Either fill in the online enquiry form or speak to our sales team who have over 100 years of industry experience!
The CESTB-340 range of products is a replacement immersion heater for common unvented water cylinders such as Albion, Range and Copperform.
1-12kW, Element Diamter: 8mm
Head Thread Size: 2, 2¼, 2½″ BSP IP67 Atex Certified terminal cover
Removable Core Elements
Optional Thremostat Ranges available
Limited Unit 10, Top Deck
Bolton, BL4 0AN
Tel: 0161 727 3713
Email: [email protected]