Designed for control of solutions and protection of equipment in arduous corrosive environments, typically found in chemical process, metal finishing, steel industries and marine environments.
Our sister company Braude are specialist manufacturers of heating and cooling systems for highly corrosive liquids using high integrity fluoropolymers for optimum chemical resistance.
Examples of products
Thermaster fully automatic temperature controller
PRTD sensor, capillary or compensating cable, no moving parts Permanent clear display of solution temperature.
Relay operation: 3 & 3 wire output, break on rise (std) or make on rise* Simple set point adjustment.
Easy to calibrate: set temperature plugs available Range -10°C to +110°C, ±1°C accuracy “Heater on” display “Probe fault” indication Dimensions: 125mm x 125mm x 75mm deep.
Levelmaster liquid level controller
Probe has no moving parts,High level only, low level only or dual operation.
Low voltage AC detection circuit Suitable for most aqueous or conductive solutions
High sensitivity version available for deionised water
Easy setting of control height Suitable for any vessel: steel, polymer or fiberglass HPD version available for use with Polaris heaters Dimensions: 125mm x 125mm x 75mm deep
Tankmaster MP combined temperature & level controller
Combined features of Thermaster and Levelmaster Additional temperature control circuit available, programmable to give high or low temperature alarm or control, or go/no go operation band*
Probes interchangeable with Thermaster and Levelmaster,
Additional outputs available for control of heaters, coolers, pumps and alarm Compatible with HPD probes Dimensions: 175mm x 125mm x 75mm deep
Limited Unit 10, Top Deck
Bolton, BL4 0AN
Tel: 0161 727 3713
Email: [email protected]