Cartridge Heaters & Tool Heating

Info & Product Examples

Cartridge Heaters can, to a limited space, give very high power. Thanks to the design the heat is quickly distributed over the whole surface mantle of the element. The element can withstand high demands of impact resistance and vibration security. Fields of application for cartridge heaters are primarily tool heating within e.g. plastic -, rubber -, wood -, and paper industry, foundries, medicin technical and laboratory heating of liquids.

Nozzle Elements are produced with high precision and with high surface loading to meet the high demands of quick and safe heating. During the manufacturing process the element is subject to very high pressure to reach high insulation resistance, good heat transmission without internal voids in the element and a very smooth surface for optional and uniform heat transmission from the total surface of the element. The element is absolutely tight to avoid that for instance melted plastic, oil or gas can leak in.

Ring and Band Elements are generally produced and supplied to according to customer specification. Examples application areas are: Injection moulding machines-extruders, containers, tanks, moulds, tools, etc. The design of these units is typically either Micanite or Ceramic with plate casing.

Cartridge Heaters

Types: We can supply both UTX and UTC design cartridge heaters in a huge variety of sizes and also to custom specifications.

 

Cartridge Heaters for Contact Heating

http://www.heatrod.com/wp-content/uploads/2012/11/1.08.00.jpg
Ø x L Power W Surface Power W/cm2
Ø 6,5 mm x 25-160 mm 75-500 W 8-58
Ø 8 mm x 40-160 mm 125-600 W 6-34
Ø 10 mm x 25-200 mm 75-1000 W 7-43
Ø 12,5 mm x 40-300 mm 125-2000 W 4-50
Ø 16 mm x 40-400 mm 160-2500 W 4-40
Ø 20 mm x 60-500 mm 200-5000 W 6-34
Material Stainless steel AISI 321/EN 1.4541
Dimensions Ø 6.5 , 8, 10, 12.5, 16, 20 mm
Inactive section app. 10 mm at the connection end and appr. 5 mm at the other end.
Connections 250 mm glass fibre armoured nickel wire
Helical protective hose, zincified steel strip
Wave hose (gas- and liquid tight)
Armoured hose, zincified
Right angle casing
Additional Reamed holes a smallest tolerance H7
are required (Swedish standard). If a surface load greater that 20W/cm2 is required, individual adjustment is necessary.
Benefits
  • High Power in confined space
  • Impact Resistant
  • Vibration Resistant
  • Environment Resistant (special coatings)
Fields of application
  • Machine Tool Heating
  • Plastic Extrusion
  • Rubber Heating
  • Foundry Application